Free QR Code Generator
Turn any link, text, phone number or Wi-Fi password into a QR code. Download it as a PNG.
ToolsHubly — QR Code Generator • Your link or text never leaves your device. The QR code is drawn entirely in your browser.
What is a QR code?
A QR code is a square barcode that a phone camera can read in one second. Point your camera at it and it opens a link, shows text, or connects to Wi-Fi — no typing needed. Shops use them for menus and payments, teachers for worksheets, and creators for linking to their profiles.
QR stands for "Quick Response", and the name is the point: unlike an old barcode that holds a dozen digits, a QR code holds a whole link or message, and any modern phone reads it with the normal camera app — no special scanner needed. That is why they went from factory floors in Japan, where they were invented in the 1990s, to every restaurant table and shop counter in the world.
How to create a QR code in 3 steps
Step 1: Enter your link or text
Type or paste the link you want people to open — your website, Instagram profile, YouTube video, or a Google Form. Short links work best, because a shorter link makes a simpler code with bigger squares, which is easier to scan. The tool starts with our own site filled in, so you can see it work before typing anything.
Step 2: Generate the code
Use the tool above and press Generate. Your QR code appears instantly. Test it with your own phone camera before sharing it — open the camera, point it at the code, and check that the right link pops up. This 10-second test catches typos that would otherwise send people to the wrong page, or nowhere at all.
Step 3: Download and share
Download the PNG, then print it on a poster, add it to a business card, or share it on WhatsApp and social media. Anyone who scans it goes straight to your link. The PNG is 300×300 pixels by default, which prints cleanly at small sizes — pick 500 px in the size dropdown for a large poster print.
How a QR code actually works
A QR code is just your text, written in black and white squares instead of letters. Three big squares in the corners tell the phone camera where the code is and which way up it is — that is why a QR code scans even when it is tilted or upside down. The rest of the squares carry the data, plus built-in error correction: a code can still scan even if part of it is scratched, dirty or covered, because the missing pieces are reconstructed from the redundancy.
That error correction is also why you sometimes see QR codes with a small logo in the middle. The logo covers part of the code, and the error correction fills in the gap. Keep the logo small, though — cover too much and the code stops scanning.
Static vs dynamic QR codes — which one is this?
The tool above makes a static QR code: your link is baked directly into the pattern of squares. That has two consequences worth knowing.
First, a static code never expires and never stops working on its own. It works as long as the link works. If the page moves or the account is deleted, the code will lead to a dead page — so only encode links you control and expect to keep.
Second, a static code cannot be edited after it is printed. If you need to change where a printed code leads without reprinting it, you need a dynamic QR code, which points at a redirect service you can update later. Dynamic codes usually cost money and require an account. For a business card, a menu, a poster or a worksheet, a free static code is almost always the right choice — just double-check the link before you print a thousand copies.
Where to use QR codes
- Business cards: link to your website or WhatsApp number, so nobody has to type a long address.
- Menus and posters: link to a menu, price list or booking form. Customers scan and order without waiting for a printed menu.
- Classroom: link students to a worksheet or video. One code on the board replaces a typed-out link nobody can copy correctly.
- Payments: many UPI apps accept QR codes for payments — the code carries the payment address instead of a typed number.
- Social media: link to your Instagram, YouTube or portfolio from a flyer, a stall, or the back of a visiting card.
- Wi-Fi sharing: a code can carry a network name and password, so guests join without you reading the password out loud. The text for that uses a special format (WIFI:T:WPA;S:networkname;P:password;;) — paste it into the tool as plain text and it works the same way.
- Events and tickets: link to a registration form, a location map, or a feedback form on the way out.
Print size and placement: the rules that decide whether it scans
A code that scans perfectly on your screen can fail on paper if it is printed too small or placed badly. These rules cover almost every failure:
Size. A QR code smaller than 2 cm is hard to scan — print at least 3 cm wide for anything scanned up close, like a business card. As a rule of thumb, the code should be about one-tenth as wide as the distance it will be scanned from: a poster read from 1 metre away needs a code about 10 cm wide, and a billboard read from 10 metres needs one about a metre wide.
Contrast. Black on white scans best. Avoid light colours on light backgrounds, and never put a code on a busy photograph — the camera cannot tell the code squares from the picture behind them.
Quiet zone. Leave a clean white margin around the code, at least as wide as four small squares. A code printed right up against text or a border edge will not scan reliably.
Flat and still. Do not put a QR code on a moving vehicle, a curved bottle, or a crinkled surface. The camera needs a flat, steady image.
Light. A code in a dark corner fails. If it will be scanned indoors, make sure there is enough light on it, and avoid glossy paper that reflects the flash back into the camera.
Test the printed copy, not just the screen. Print one copy, scan it with a normal phone camera in the place it will actually be used, and check the link opens. A screen test proves the code is valid; only a print test proves it works where it will live.
5 mistakes to avoid
- Linking to a broken page. Always test the link first — and test the printed code, not just the screen.
- Printing too small. A QR code smaller than 2 cm is hard to scan — print at least 3 cm wide.
- Low contrast. Black on white scans best. Avoid light colours on light backgrounds.
- Placing it where it cannot be scanned. Don't put a QR code on a moving vehicle or a curved surface.
- Using a link that expires. Use a permanent link, not a temporary one. A static code cannot be edited after printing, so a link that dies later kills every printed copy with it.
Frequently asked questions
Is this QR code generator free?
Yes. No sign-up, no limit, and the code never expires.
Do QR codes expire?
No — a QR code is just an image of your link. It works as long as the link works.
Can I print a QR code?
Yes, download the PNG and print it at any size. It stays scannable when printed clearly — follow the size and contrast rules above.
Does it work on iPhone and Android?
Yes. Both open the camera app and scan QR codes natively — no extra app needed.
Is my link stored anywhere?
No. The QR code is drawn entirely in your browser — your link or text is never sent to our server or anyone else's. That is true of every tool on ToolsHubly.
Can I put a QR code on a coloured background?
You can, as long as the contrast stays strong — dark code on a light background. Light code on a dark background works on some phones but fails on others, so black-on-white is the safe choice.
What is the most I can put in a QR code?
A QR code can hold a few thousand characters, but long text makes a dense code with tiny squares that is hard to scan. Keep it to a short link or a short message — under 100 characters scans best.
Try it now
Scroll to the top, paste your website link, generate the code, and scan it with your phone. One scan, straight to your page — that is the whole trick.
Next on ToolsHubly: our free Image to WebP converter, for turning JPG and PNG photos into smaller WebP files in one click.

No comments:
Post a Comment